Water Quality Report · Updated May 12, 2026
CANTON TOWNSHIP
CANTON TOWNSHIP delivers tap water graded B (78/100) by TapWaterSafety.org. The utility serves approximately 99,627 residents in CANTON, Michigan using surface water. The most significant water quality concerns are: Haloacetic acids (HAA9) significantly above health guideline; Haloacetic acids (HAA5) significantly above health guideline; Total trihalomethanes (TTHMs) significantly above health guideline. For questions, the utility can be reached at 734-394-5295.
Is CANTON tap water safe to drink?
CANTON TOWNSHIP delivers tap water that earns a grade of B (78/100) from TapWaterSafety.org — a good rating, with only minor concerns relative to health-based guidelines.
The utility serves 99,627 residents in CANTON, drawing from surface water.
Public testing data identifies 5 contaminants in this water above EWG's health-based guidelines, including: Haloacetic acids (HAA9), Haloacetic acids (HAA5), Total trihalomethanes (TTHMs), Chromium (hexavalent), Nitrate*. For most residents, a properly certified home filter at the kitchen tap is the most cost-effective way to reduce exposure to whatever's in your water. See our filter recommendations below, matched specifically to this utility's contaminant profile.
Quick actions for CANTON residents
Top concerns in this water
Based on the most recent EPA and EWG data, these are the most significant water quality issues for CANTON TOWNSHIP.
Haloacetic acids (HAA9) significantly above health guideline
Moderate concernHaloacetic acids (HAA9) detected at 26.0 ppb, 434x above the EWG health guideline of 0.06 ppb.
Haloacetic acids (HAA5) significantly above health guideline
Moderate concernHaloacetic acids (HAA5) detected at 20.2 ppb, 202x above the EWG health guideline of 0.1 ppb.
Total trihalomethanes (TTHMs) significantly above health guideline
Moderate concernTotal trihalomethanes (TTHMs) detected at 26.1 ppb, 174x above the EWG health guideline of 0.15 ppb.
Contact CANTON TOWNSHIP
Reach the utility directly for service issues, water quality concerns, or to request your Consumer Confidence Report.
General Contact
Recommended water filters for CANTON
Filters matched to the specific contaminants in this water supply.
Carbon block (NSF/ANSI 42 + 53)
$40-$750Activated carbon is highly effective for disinfection byproducts like TTHM and HAA5.
Disclosure: TapWaterSafety earns a commission from purchases made through these links. This does not influence our scoring methodology or filter selection.
Score breakdown
This utility's overall score of 78/100 breaks down across five weighted components. Read the full methodology →
Contaminants detected — international standards comparison
Every contaminant detected, compared side-by-side against US EPA legal limits, the EU Drinking Water Directive (2020/2184), WHO Guidelines, and California's Public Health Goal (the strictest US benchmark). Why we show multiple standards →
| Contaminant | Detected | EWG US health-based |
EPA US legal |
EU DWD Europe |
WHO global |
CA PHG strictest US |
Tested sample year |
Status |
|---|---|---|---|---|---|---|---|---|
| Haloacetic acids (HAA9) Disinfection byproduct |
26.0 ppb | 0.06 | — | — | — | — | — | 434× over |
| Haloacetic acids (HAA5) Disinfection byproduct |
20.2 ppb | 0.1 | 60.0 | 60 | — | — | — | 202× over |
| Total trihalomethanes (TTHMs) Disinfection byproduct |
26.1 ppb | 0.15 | 80.0 | 100 | — | — | — | 174× over |
| Chromium (hexavalent) Heavy metal |
0.138 ppb | 0.02 | — | — | — | — | — | 6.9× over |
| Nitrate* Inorganic |
0.607 ppm | 0.14 | 10.0 | 11.3 | 11.3 | 10 | — | 4.3× over |
| Vanadium Other |
0.207 ppb | 21.0 | — | — | — | — | — | Below guideline |
| Manganese Heavy metal |
0.447 ppb | 100.0 | — | 50 | 80 | — | — | Below guideline |
| Strontium Radiological |
0.103 ppb | 1500.0 | — | — | — | — | — | Below guideline |
| Fluoride* Inorganic |
0.583 ppm | — | 4.0 | 1.5 | 1.5 | — | — | Below guideline |
All values in the unit of the detected level. Red cells indicate the detected level exceeds that standard. Some contaminants have limits in some jurisdictions but not others (shown as —). The "Tested" column shows the year each contaminant sample was collected.
Sources: US EPA, EU Drinking Water Directive 2020/2184, WHO Guidelines (4th ed.), California OEHHA PHGs, EWG Tap Water Database.
CANTON TOWNSHIP service area
This water system serves 1 community in Wayne County, Michigan. Click any city for its dedicated tap water quality page.
Find the right filter for CANTON water
Browse filter categories by water-quality concern. Each option below is NSF-certified for the matched contaminant type.