Water Quality Report · Updated October 07, 2026
LEBANON WATER SYSTEM
LEBANON WATER SYSTEM delivers tap water graded B (81/100) by TapWaterSafety.org. The utility serves approximately 60,669 residents in LEBANON, Tennessee using surface water. The most significant water quality concerns are: Haloacetic acids (HAA9) significantly above health guideline; Total trihalomethanes (TTHMs) significantly above health guideline; Haloacetic acids (HAA5) significantly above health guideline.
Is LEBANON tap water safe to drink?
LEBANON WATER SYSTEM delivers tap water that earns a grade of B (81/100) from TapWaterSafety.org — a good rating, with only minor concerns relative to health-based guidelines.
The utility serves 60,669 residents in LEBANON, drawing from surface water.
Public testing data identifies 9 contaminants in this water above EWG's health-based guidelines, including: Haloacetic acids (HAA9), Total trihalomethanes (TTHMs), Haloacetic acids (HAA5), Trichloroacetic acid, Bromodichloromethane, Chloroform, Dichloroacetic acid, Nitrate, Chromium (hexavalent). For most residents, a properly certified home filter at the kitchen tap is the most cost-effective way to reduce exposure to whatever's in your water. See our filter recommendations below, matched specifically to this utility's contaminant profile.
EPA compliance record
Official U.S. EPA records for LEBANON WATER SYSTEM (system ID TN0000393) for the last 3 years. Checked 2026-10-07.
Source: U.S. EPA Enforcement and Compliance History Online (ECHO), from the Safe Drinking Water Information System. See EPA's full report.
Quick actions for LEBANON residents
Top concerns in this water
Based on the most recent EPA and EWG data, these are the most significant water quality issues for LEBANON WATER SYSTEM.
Haloacetic acids (HAA9) significantly above health guideline
Moderate concernHaloacetic acids (HAA9) detected at 24.4 ppb, 406x above the EWG health guideline of 0.06 ppb.
Total trihalomethanes (TTHMs) significantly above health guideline
Moderate concernTotal trihalomethanes (TTHMs) detected at 34.1 ppb, 227x above the EWG health guideline of 0.15 ppb.
Haloacetic acids (HAA5) significantly above health guideline
Moderate concernHaloacetic acids (HAA5) detected at 22.6 ppb, 226x above the EWG health guideline of 0.1 ppb.
Contact LEBANON WATER SYSTEM
Reach the utility directly for service issues, water quality concerns, or to request your Consumer Confidence Report.
General Contact
Treatment Plant
Recommended water filters for LEBANON
Filters matched to the specific contaminants in this water supply.
Carbon filter certified for VOCs (NSF/ANSI 53)
$180-$599Activated carbon is effective for disinfection byproducts. Look for NSF/ANSI 53 VOC reduction.
Disclosure: TapWaterSafety earns a commission from purchases made through these links. This does not influence our scoring methodology or filter selection.
Score breakdown
This utility's overall score of 81/100 breaks down across five weighted components. Read the full methodology →
Contaminants detected — international standards comparison
Every contaminant detected, compared side-by-side against US EPA legal limits, the EU Drinking Water Directive (2020/2184), WHO Guidelines, and California's Public Health Goal (the strictest US benchmark). Why we show multiple standards →
| Contaminant | Detected | EWG US health-based |
EPA US legal |
EU DWD Europe |
WHO global |
CA PHG strictest US |
Tested sample year |
Status |
|---|---|---|---|---|---|---|---|---|
| Haloacetic acids (HAA9) Disinfection byproduct |
24.4 ppb | 0.06 | — | — | — | — | — | 406× over |
| Total trihalomethanes (TTHMs) Disinfection byproduct |
34.1 ppb | 0.15 | 80.0 | 100 | — | — | — | 227× over |
| Haloacetic acids (HAA5) Disinfection byproduct |
22.6 ppb | 0.1 | 60.0 | 60 | — | — | — | 226× over |
| Trichloroacetic acid Disinfection byproduct |
9.95 ppb | 0.1 | — | — | — | — | — | 100× over |
| Bromodichloromethane Disinfection byproduct |
4.43 ppb | 0.06 | — | — | — | — | — | 74× over |
| Chloroform Disinfection byproduct |
29.1 ppb | 0.4 | — | — | — | — | — | 73× over |
| Dichloroacetic acid Disinfection byproduct |
11.2 ppb | 0.2 | — | — | — | — | — | 56× over |
| Nitrate Inorganic |
0.305 ppm | 0.14 | 10.0 | 11.3 | 11.3 | 10 | — | 2.2× over |
| Chromium (hexavalent) Heavy metal |
0.0413 ppb | 0.02 | — | — | — | — | — | 2.1× over |
| Chlorate Disinfection byproduct |
113.8 ppb | 210.0 | — | — | — | — | — | Below guideline |
| Dibromochloromethane Disinfection byproduct |
0.0405 ppb | 0.1 | — | — | — | — | — | Below guideline |
| Monochloroacetic acid Disinfection byproduct |
1.4 ppb | 53.0 | — | — | — | — | — | Below guideline |
| Manganese Heavy metal |
0.96 ppb | 100.0 | — | 50 | 80 | — | — | Below guideline |
| Vanadium Other |
0.15 ppb | 21.0 | — | — | — | — | — | Below guideline |
| Strontium Radiological |
0.1 ppb | 1500.0 | — | — | — | — | — | Below guideline |
All values in the unit of the detected level. Red cells indicate the detected level exceeds that standard. Some contaminants have limits in some jurisdictions but not others (shown as —). The "Tested" column shows the year each contaminant sample was collected.
Sources: US EPA, EU Drinking Water Directive 2020/2184, WHO Guidelines (4th ed.), California OEHHA PHGs, EWG Tap Water Database.
LEBANON WATER SYSTEM service area
This water system serves 1 community in Wilson County, Tennessee. Click any city for its dedicated tap water quality page.
Find the right filter for LEBANON water
Browse filter categories by water-quality concern. Each option below is NSF-certified for the matched contaminant type.