Water Quality Report · Updated May 12, 2026
RENTON CITY OF
RENTON CITY OF delivers tap water graded C (69/100) by TapWaterSafety.org. The utility serves approximately 108,091 residents in Renton, Washington using groundwater. The most significant water quality concerns are: Haloacetic acids (HAA9) significantly above health guideline; Total trihalomethanes (TTHMs) significantly above health guideline; Bromodichloromethane significantly above health guideline.
Is Renton tap water safe to drink?
RENTON CITY OF delivers tap water that earns a grade of C (69/100) from TapWaterSafety.org — an average rating, with several contaminants above health guidelines but generally compliant with US legal limits.
The utility serves 108,091 residents in Renton, drawing from groundwater.
Public testing data identifies 10 contaminants in this water above EWG's health-based guidelines, including: Haloacetic acids (HAA9), Total trihalomethanes (TTHMs), Bromodichloromethane, Haloacetic acids (HAA5), Trichloroacetic acid, Dibromochloromethane, Chloroform, Dichloroacetic acid, Chromium (hexavalent), Nitrate. For most residents, a properly certified home filter at the kitchen tap is the most cost-effective way to reduce exposure to whatever's in your water. See our filter recommendations below, matched specifically to this utility's contaminant profile.
Quick actions for Renton residents
Top concerns in this water
Based on the most recent EPA and EWG data, these are the most significant water quality issues for RENTON CITY OF.
Haloacetic acids (HAA9) significantly above health guideline
Moderate concernHaloacetic acids (HAA9) detected at 7.86 ppb, 131x above the EWG health guideline of 0.06 ppb.
Total trihalomethanes (TTHMs) significantly above health guideline
Moderate concernTotal trihalomethanes (TTHMs) detected at 12.3 ppb, 82x above the EWG health guideline of 0.15 ppb.
Bromodichloromethane significantly above health guideline
Moderate concernBromodichloromethane detected at 3.14 ppb, 52x above the EWG health guideline of 0.06 ppb.
Contact RENTON CITY OF
Reach the utility directly for service issues, water quality concerns, or to request your Consumer Confidence Report.
General Contact
Treatment Plant
Recommended water filters for Renton
Filters matched to the specific contaminants in this water supply.
Carbon block (NSF/ANSI 42 + 53)
$40-$750Activated carbon is highly effective for disinfection byproducts like TTHM and HAA5.
Disclosure: TapWaterSafety earns a commission from purchases made through these links. This does not influence our scoring methodology or filter selection.
Score breakdown
This utility's overall score of 69/100 breaks down across five weighted components. Read the full methodology →
Contaminants detected — international standards comparison
Every contaminant detected, compared side-by-side against US EPA legal limits, the EU Drinking Water Directive (2020/2184), WHO Guidelines, and California's Public Health Goal (the strictest US benchmark). Why we show multiple standards →
| Contaminant | Detected | EWG US health-based |
EPA US legal |
EU DWD Europe |
WHO global |
CA PHG strictest US |
Tested sample year |
Status |
|---|---|---|---|---|---|---|---|---|
| Haloacetic acids (HAA9) Disinfection byproduct |
7.86 ppb | 0.06 | — | — | — | — | — | 131× over |
| Total trihalomethanes (TTHMs) Disinfection byproduct |
12.3 ppb | 0.15 | 80.0 | 100 | — | — | — | 82× over |
| Bromodichloromethane Disinfection byproduct |
3.14 ppb | 0.06 | — | — | — | — | — | 52× over |
| Haloacetic acids (HAA5) Disinfection byproduct |
4.46 ppb | 0.1 | 60.0 | 60 | — | — | — | 45× over |
| Trichloroacetic acid Disinfection byproduct |
2.0 ppb | 0.1 | — | — | — | — | — | 20× over |
| Dibromochloromethane Disinfection byproduct |
1.66 ppb | 0.1 | — | — | — | — | — | 17× over |
| Chloroform Disinfection byproduct |
5.77 ppb | 0.4 | — | — | — | — | — | 14× over |
| Dichloroacetic acid Disinfection byproduct |
2.47 ppb | 0.2 | — | — | — | — | — | 12× over |
| Chromium (hexavalent) Heavy metal |
0.128 ppb | 0.02 | — | — | — | — | — | 6.4× over |
| Nitrate Inorganic |
0.73 ppm | 0.14 | 10.0 | 11.3 | 11.3 | 10 | — | 5.2× over |
| Chlorate Disinfection byproduct |
44.0 ppb | 210.0 | — | — | — | — | — | Below guideline |
| Vanadium Other |
0.734 ppb | 21.0 | — | — | — | — | — | Below guideline |
| Manganese Heavy metal |
0.152 ppb | 100.0 | — | 50 | 80 | — | — | Below guideline |
| Perfluorobutane sulfonate (PFBS) PFAS |
0.5 ppt | 2000.0 | — | — | — | — | — | Below guideline |
| Strontium Radiological |
0.0701 ppb | 1500.0 | — | — | — | — | — | Below guideline |
| Fluoride Inorganic |
0.7 ppm | — | 4.0 | 1.5 | 1.5 | — | — | Below guideline |
All values in the unit of the detected level. Red cells indicate the detected level exceeds that standard. Some contaminants have limits in some jurisdictions but not others (shown as —). The "Tested" column shows the year each contaminant sample was collected.
Sources: US EPA, EU Drinking Water Directive 2020/2184, WHO Guidelines (4th ed.), California OEHHA PHGs, EWG Tap Water Database.
RENTON CITY OF service area
This water system serves 1 community in King County, Washington. Click any city for its dedicated tap water quality page.
Find the right filter for Renton water
Browse filter categories by water-quality concern. Each option below is NSF-certified for the matched contaminant type.