Water Quality Report · Updated May 12, 2026
Tulsa Municipal Water System
Tulsa Municipal Water System delivers tap water graded B (76/100) by TapWaterSafety.org. The utility serves approximately 401,000 residents in Tulsa, Oklahoma using surface water from the Lake Oologah/Spavinaw Creek. The most significant water quality concerns are: Haloacetic Acids (HAA5) significantly above health guideline; Chromium-6 detected. For questions, the utility can be reached at (405) 308-2424.
Is Tulsa tap water safe to drink?
Tulsa Municipal Water System delivers tap water that earns a grade of B (76/100) from TapWaterSafety.org — a good rating, with only minor concerns relative to health-based guidelines.
The utility serves 401,000 residents in Tulsa, drawing from surface water (Lake Oologah/Spavinaw Creek) and disinfecting with chloramine.
Public testing data identifies 12 contaminants in this water above EWG's health-based guidelines, including: Haloacetic Acids (HAA5), Haloacetic Acids (HAA5), Haloacetic Acids (HAA5), Total Trihalomethanes (TTHMs), Total Trihalomethanes (TTHMs), Total Trihalomethanes (TTHMs), Chromium-6 (Hexavalent), Chromium-6 (Hexavalent), Chromium-6 (Hexavalent), Lead, Lead, Lead. For most residents, a properly certified home filter at the kitchen tap is the most cost-effective way to reduce exposure to whatever's in your water. See our filter recommendations below, matched specifically to this utility's contaminant profile.
Top concerns in this water
Based on the most recent EPA and EWG data, these are the most significant water quality issues for Tulsa Municipal Water System.
Haloacetic Acids (HAA5) significantly above health guideline
Moderate concernHaloacetic Acids (HAA5) detected at 28.4 ppb, 284x above the EWG health guideline of 0.1 ppb.
Chromium-6 detected
Moderate concernChromium-6 detected at 0.32 ppb.
Contact Tulsa Municipal Water System
Reach the utility directly for service issues, water quality concerns, or to request your Consumer Confidence Report.
General Contact
Water Quality Contact
For questions about contaminants, test results, or your Consumer Confidence Report.
Treatment Plant
Recommended water filters for Tulsa
Filters matched to the specific contaminants in this water supply.
Carbon block (NSF/ANSI 42 + 53)
$40-$750Activated carbon is highly effective for disinfection byproducts like TTHM and HAA5.
Reverse Osmosis
$249-$750Chromium-6 requires reverse osmosis for reliable removal. Standard carbon filters do not address it.
Disclosure: TapWaterSafety earns a commission from purchases made through these links. This does not influence our scoring methodology or filter selection.
Score breakdown
This utility's overall score of 76/100 breaks down across five weighted components. Read the full methodology →
Contaminants detected — international standards comparison
Every contaminant detected, compared side-by-side against US EPA legal limits, the EU Drinking Water Directive (2020/2184), WHO Guidelines, and California's Public Health Goal (the strictest US benchmark). Why we show multiple standards →
| Contaminant | Detected | EWG US health-based |
EPA US legal |
EU DWD Europe |
WHO global |
CA PHG strictest US |
Tested sample year |
Status |
|---|---|---|---|---|---|---|---|---|
| Haloacetic Acids (HAA5) Disinfection byproduct |
28.4 ppb | 0.1 | 60 | 60 | — | — | 2022 | 284× over |
| Haloacetic Acids (HAA5) Disinfection byproduct |
27.4 ppb | 0.1 | 60 | 60 | — | — | 2023 | 274× over |
| Haloacetic Acids (HAA5) Disinfection byproduct |
21.9 ppb | 0.1 | 60 | 60 | — | — | 2024 | 219× over |
| Total Trihalomethanes (TTHMs) Disinfection byproduct |
18.4 ppb | 0.6 | 80 | 100 | — | — | 2022 | 31× over |
| Total Trihalomethanes (TTHMs) Disinfection byproduct |
17.1 ppb | 0.6 | 80 | 100 | — | — | 2024 | 28× over |
| Total Trihalomethanes (TTHMs) Disinfection byproduct |
12.7 ppb | 0.6 | 80 | 100 | — | — | 2023 | 21× over |
| Chromium-6 (Hexavalent) Heavy metal |
0.346 ppb | 0.02 | — | — | — | 0.02 | 2022 | 17× over |
| Chromium-6 (Hexavalent) Heavy metal |
0.32 ppb | 0.02 | — | — | — | 0.02 | 2024 | 16× over |
| Chromium-6 (Hexavalent) Heavy metal |
0.243 ppb | 0.02 | — | — | — | 0.02 | 2023 | 12× over |
| Lead Heavy metal |
0.8 ppb | 0 | 15 | 5 | 10 | 0.2 | 2024 | — |
| Lead Heavy metal |
0.918 ppb | 0 | 15 | 5 | 10 | 0.2 | 2023 | — |
| Lead Heavy metal |
0.768 ppb | 0 | 15 | 5 | 10 | 0.2 | 2022 | — |
| Contaminant | Detected (2024) | EWG | EPA | EU DWD | WHO | CA PHG | Status |
|---|---|---|---|---|---|---|---|
| Total Trihalomethanes (TTHMs) Disinfection byproduct |
17.1 ppb | 0.6 | 80 | 100 | — | — | 28× over |
| Haloacetic Acids (HAA5) Disinfection byproduct |
21.9 ppb | 0.1 | 60 | 60 | — | — | 219× over |
| Lead Heavy metal |
0.8 ppb | 0 | 15 | 5 | 10 | 0.2 | — |
| Chromium-6 (Hexavalent) Heavy metal |
0.32 ppb | 0.02 | — | — | — | 0.02 | 16× over |
| Contaminant | Detected (2023) | EWG | EPA | EU DWD | WHO | CA PHG | Status |
|---|---|---|---|---|---|---|---|
| Total Trihalomethanes (TTHMs) Disinfection byproduct |
12.7 ppb | 0.6 | 80 | 100 | — | — | 21× over |
| Haloacetic Acids (HAA5) Disinfection byproduct |
27.4 ppb | 0.1 | 60 | 60 | — | — | 274× over |
| Lead Heavy metal |
0.918 ppb | 0 | 15 | 5 | 10 | 0.2 | — |
| Chromium-6 (Hexavalent) Heavy metal |
0.243 ppb | 0.02 | — | — | — | 0.02 | 12× over |
| Contaminant | Detected (2022) | EWG | EPA | EU DWD | WHO | CA PHG | Status |
|---|---|---|---|---|---|---|---|
| Total Trihalomethanes (TTHMs) Disinfection byproduct |
18.4 ppb | 0.6 | 80 | 100 | — | — | 31× over |
| Haloacetic Acids (HAA5) Disinfection byproduct |
28.4 ppb | 0.1 | 60 | 60 | — | — | 284× over |
| Lead Heavy metal |
0.768 ppb | 0 | 15 | 5 | 10 | 0.2 | — |
| Chromium-6 (Hexavalent) Heavy metal |
0.346 ppb | 0.02 | — | — | — | 0.02 | 17× over |
All values in the unit of the detected level. Red cells indicate the detected level exceeds that standard. Some contaminants have limits in some jurisdictions but not others (shown as —). The "Tested" column shows the year each contaminant sample was collected.
Sources: US EPA, EU Drinking Water Directive 2020/2184, WHO Guidelines (4th ed.), California OEHHA PHGs, EWG Tap Water Database, and Tulsa Municipal Water System's Consumer Confidence Report.
Tulsa Municipal Water System service area
This water system serves 1 community in Tulsa County, Oklahoma. Click any city for its dedicated tap water quality page.
Find the right filter for Tulsa water
Browse filter categories by water-quality concern. Each option below is NSF-certified for the matched contaminant type.